รหัสสินค้า | apcutlp10 |
หมวดหมู่ | น้ำมัน EDM (น้ำมันสปาร์ค) |
ราคา | 0.00 บาท |
สถานะสินค้า | พร้อมส่ง |
ลงสินค้า | 14 ส.ค. 2557 |
อัพเดทล่าสุด | 8 ส.ค. 2567 |
คงเหลือ | ไม่จำกัด |
จำนวน | ถัง |
น้ำมัน EDM น้ำมันสปาร์ค Apollo
DAPHNE CUT LP 10
1. Application
Daphne Cut LP10 is a superior cutting fluid for cutting and grinding of non-ferrous metal, such asbrass and suitable for electric discharge machining.
2. Characteristic
Daphne Cut LP10 is high quality hydro-treated synthetic lubricating oil in narrow boiling point extent.
1. Colorless, odorless and causing no skin dermatitis.
2. Low viscosity and high flash point.
3. As high flash point, this oil is to prevent fire.
4. As good stability extends oil life.
5. As low viscosity, enable store move chips easily.
3. |
Typical Specification
Density |
@15°C |
g/cm3 |
0.7850 |
|
Color |
ASTM |
|
L0.5 |
|
Flash Point |
PM |
°C |
87 |
|
Viscosity |
@40 °C |
mm2/s |
2.560 |
|
Copper Corrosion |
100 °Cx1 Hr. |
|
1a |
|
Distillation Test |
IBP |
°C |
213
|
|
|
95% |
°C |
250 |
|
|
EP |
°C |
262 |
The information in this bulletin is, to our best knowledge, true and accurate, but all recommendation or suggestions arewithoutguarantee since the conditions of use are beyondour control. The manufacturer does not accept liability for any loss or damage, however they arise, whichr esults directly from the use of such information nor do we offer any warranty of immunity against patent infringement.
หน้าที่เข้าชม | 872,445 ครั้ง |
ผู้ชมทั้งหมด | 562,801 ครั้ง |
เปิดร้าน | 9 ก.ค. 2555 |
ร้านค้าอัพเดท | 7 ก.ย. 2568 |